The question of how to replace basin taps is an important matter to deal with. This is especially true when the basin tapware has significantly eroded and it has broken down in need of repairs or replacements. Yes, it can be a taxing job and time-consuming, but it is possible if you have the right skills and tools on the topic of replacing your basin taps.
In today’s discussion, I will relay the tools and materials needed for the project and then the specific guidelines on creating the perfect bathroom basin taps.
Materials/Tools Needed
Before we resume the guidelines, we have to talk about the tools and materials necessary in order to finish the project—
- The new bathroom basin tap set
- PTFE (Polytetrafluoroethylene) tape is used to wrap around the tape to keep the joints together and prevent leaks from occurring
- Adjustable wrench
- Screwdriver
- A pipe saw or any similar cutting tool
- Junior hacksaw
- Basin spanner
- Tap connector pipes
As you see, the materials and tools needed are pretty basic, maybe except for the new bathroom taps, which should be present in your own home. However, the process of fitting new taps to old pipes may be a different story which may take a lot of time, skills, and perseverance.
But the good news is that it’s possible, as I mentioned. In the next section, I will provide the essentials of how to replace basin taps successfully without the help of a professional that should save you hundreds of dollars in the process.
Step by Step Instructions
The following is the step-by-step process of changing old bathroom taps to new and improved ones—
First Step: Shut Down the Water System
First and foremost, you have to turn off your water system since you are going to work with pipelines. After you have done so, turn on the faucet to make sure that it’s properly switched off to avoid any accidents from happening.
Second Step: Loosening the Tap
Now, we go directly to the pipes and removal process of other water connectors and accessories like the faucet. As you are undergoing the process, it would be best to place the screws and bolts in an organized manner inside plastic storage, perhaps. This is to prevent them from being lost during the replacement.
The process of changing taps on a pedestal sink may seem a different matter, but it is relatively the same. The only difference is the design and form of the bathroom sink.
Third Step: Unscrew the Nuts Connecting the Pipe from the Basin
Now, we continue with the actual removal of the old bathroom sink by unscrewing the nuts connecting the fixture to the main water system. This specific task along could be arduous and challenging, especially if you have a small bathroom area and little space to work with.
With this being said—you will need a basin spanner to loosen the nuts underneath the basin. In other instances, the nuts may be eroded due to prolonged water exposure, such as in the case of old taps. In this case, you may need to use a hacksaw to remove them.
Fourth Step: Check the Tap Connections
Before you resume installing the new bathroom basin to the existing plumbing system, you will have to check if the fixture fits into the old pipes. A bathroom basin tap set package usually includes flexible tails that should make the installation process a lot more convenient. You can use a pipe-cutting tool to trim the pipes whenever it’s needed.
Fifth Step: Install the New Bathroom Basin
Once you have properly checked the fitting of the bathroom basin to the existing pipeline, you can now install the new fixture and connect it to the main water system. Connect the pipes of the basin to the flexible tails you have cut earlier with the compression fitting.
But before installing the pipeline, it would be best if you wrap a PTFE tape around the connection to make it waterproof and prevent any leakages from happening.
Sixth Step: Put Back the Screws and Tighten the Bolts and Nuts
The last step requires you to get everything back to its original places, such as the screws, nuts, and bolts. You have to make sure that they are properly turned and firmly put in place. Double-check if they are properly in place before turning back the water system up and running again.
Useful Tips
To boost your success in replacing your basin taps, just follow these simple steps—
- A word of caution—do not put the bolts, screws, and nuts in the bathtub or the bathroom flooring to avoid them from being flushed down the drain
- The aim of replacing the basin taps on your own is to save money, but if you’re still unsure of what you’re doing, it is best to call a professional for help
- Again, you have to be certain if the screws, bolts, and nuts are properly in place to prevent accidents from happening
Takeaway
The process of replacing and installing a new bathroom tap may seem an easy thing to do, but it is actually time-consuming and challenging, to say the very least. The guidelines I have relayed in this article on how to replace basin taps should make it easier for you.
Frequently Asked Questions about How to Replace Basin Taps
The following are the frequent concerns that many people have in the matter of how to replace basin taps on your own—
Although it’s challenging to replace sink taps, you basically do it on your own, which should allow you to save money from professional fees. However, you have to be mindful as you’re doing the process because one mistake could jeopardize the entire task.
The process is relatively straightforward, but it takes time and is challenging to do, considering the weight of the bathroom tap and the delicate feature of the plumbing system.
0 Comments for “Basic Instructions on How to Replace Basin Taps”