The process of installing a bathroom vanity might seem arduous work to begin with. However, it is not as difficult as it appears to be once you have the techniques and tools you will need to properly install the vanity.
In this article, I will talk discuss how to install a bathroom vanity and the vanity installation cost involved to help you get a good overview of the potential expenses you may incur.
So without any further ado, let’s begin…
Preparation Work
Before you begin the work of removing and installing the bathroom vanity, you have to prepare the needed task first and the tools you will need, which I’ll relay in the next section. The following is a summary of the needed tasks in preparation for the installing bathroom vanity furniture—
- Tape measure the bathroom vicinity area
- Mark the specific key points in your bathroom for reference, such as the corners of the space and surfaces where you will drill
- Prepare protective gear such as your gloves, safety glasses, etc.
- Buy the vanity that’s in accordance with your preferences and the dimensions of your bathroom area
And then, you have to prepare the tools you will need to successfully dismantle the bathroom fixtures and install the new vanities for your bathroom.
Tools You Will Need
The following is the summary of the tools and other materials you will need for the tasks aside from the vanity. First, let’s talk about the tools—
- Caulk gun
- Stud finder
- Drill that is equipped with screwdriver bits
- Tape measure
- Pencil
- Leveler
- Jigsaw
- Coping saw
- Carpenter’s compass (if necessary)
- Small profile gauge (if necessary)
And then, you have to prepare the materials needed in installing the bathroom vanity—
- Sink drain assembly
- Wood whims
- Water supply tubes
- Two-inch drywall screws
- Faucet
- Wood blocking
- Silicone caulk
- Wood finishing materials (if necessary)
- Filler strip (if necessary)
Now, let’s move on with the actual installation process…
Installation Steps
Below is an overview of the installation of the bathroom vanity cabinets and storage：
First Step: Mark the Wall Studs
First and foremost, you have to find where the wall studs are located using an electronic stud finder. You have to mark the wall once you have found the spot where the stud is. Repeat the process depending on the number of wall studs installed in the area.
Second Step: Measure the Space of the Bathroom
Before you begin moving your vanity furniture, you have to measure first the edges of your bathroom. This task also ensures that you will select the best possible cabinet and storage.
Third Step: Shop for the Best Vanity Furniture
Now, the fun part of the process is selecting the best vanity that fits the contours of your bathroom. However, you still have to be cautious with the furniture and make sure that you are buying the vanity in accordance with the dimensions of the bathroom.
Fourth Step: Dismantle the Old Vanity
Before we begin replacing the bathroom vanity, we have to dismantle the old furniture first. This won’t be a problem if the vanity is standalone, but you may have to be extra careful if it is connected to a pipeline or plumbing system.
Fifth Step: Install the New Vanity
Once the old vanity has been removed from the place, prepare the new vanity for installation. And to install the new vanity, follow the simple guidelines listed below—
- You need to position the vanity where it’s going to be installed
- Locate where the stud mark is and level the shim and vanity if it is needed
- Drill the hole marks if there are pipelines or plumbing systems needed for the installation
Sixth Step: Attach to the Wall
Once the vanity is in place, you can now attach them to the wall using a three-inch screwdriver by drilling it into your drywall. And then, you may have to apply molding to fill in the gaps.
Seventh Step: Install the Faucet; if there are any
Install the faucet if the vanity comes with a bathroom faucet. You have to be certain that the plumbing system for the faucet prevents any leakages in the future.
Eighth Step: Double-Check
The next step is to double-check whether the vanity is in the proper place and doesn’t wobble when you interact with it.
Ninth Step: Reconnect the Water System
Once you are certain that everything is in place, you can now reconnect the water system and test if the plumbing pipes are properly reinstalled.
Tips
Below are additional tips to ensure the success of installing bathroom vanity—
- Some vanity kits come with a filler strip made of the same wood as the furniture. If it doesn’t have any, you can buy a wooden filler strip with the same composition
- You can also use this opportunity to replace the old plumbing system if needed
- Also, some vanity kits provide extra brackets for the installation process. You can use them as an extra in constructing adhesive to keep the vanity in place
- You have to prepare an approximate amount of $300 to $3,800 for the installation of the bathroom vanity
Takeaway
Again, the disassembly of the old vanity and the installation of the new vanity might seem a difficult task to work with. The installation of vanity alone is straightforward, but working with the pipelines would be challenging indeed. And if you’re not sure, you can always ask for assistance from a professional in installing bathroom vanity.
Frequently Asked Questions about Installing Bathroom Vanity
The following are some of the potential issues many people are having in regards to installing bathroom vanity:
Yes, you can install a bathroom vanity yourself, given that you have the proper knowledge about the matter and have the tools needed for the tasks.
Well, vanity doesn’t have to be attached to the wall. There are many forms of vanities, such as furniture and particular interior design. However, in regards to furniture, it adds a little security when you’re going to mount them to the wall.
The vanities alone are easy to install. However, it is a different story if it involves plumbing which may require the expertise of a professional.
0 Comments for “Removing and Installing Bathroom Vanity”